Anatomy of a Diamond Ring

Anatomyofaring

The 'Diamond Ring' is normally made of several component parts and are quite distinct.

The Stone will account for 75-90% of the overall cost of the ring.

The Setting holds the diamond in place and has a vital role in securing the stone. This may also be called a 'Collet'.

The Band will endure most of the wear since it is in constant contact with anything you touch. This may also be called a 'Shank'. Each band has to be 'Hallmarked' to identify the type and purity of the metal.

Types of Settings

	Bar Setting This features a metal bar that seperates each diamond.
	Channel Setting The stones are set between two parallels of metal.
	Claw Setting There are various styles of claw setting with one of the most common as a '4 claw' setting.
	Flush Setting A neat setting normally for smaller stones and is literally set 'Flush' to the metal.
	Millgrain Setting This is a combination of settings. The stones are set, small grains of metal are then raised to secure the stone. The outside edges are pushed over and then cut back.
	Pavé Setting A very sophisticated look which can create an amazing effect. Each tiny diamond is set almost touching and inbetween, a tiny grain is raised from the metal which secures the stones.
	Rubbed-over Setting This is a very secure setting in which the metal is pushed over the stone. They can be completely 'Rubbed-over' or 'Semi Rubbed-over' as this picture shows.
	Tension Setting This style always looks stunning on a finger creating the illusion that the stone is 'floating'. It is achieved by 65-95 pounds of pressure holding the stone in place.